Turning A Corner - Kenmore 15 Instructions Manual

4. STITCHING
All decorative patterns are possible with double needle.
Before starting any stitching operation, check needle
drop by turning the handwheel manually. Needle should
enter fabric without touching the presser foot and
needle plate. The stitch width control should not be
advanced beyond 2 ½ setting. (black dot)

5. TURNING A CORNER

To turn a square corner in double needle stitching, stop
stitching with the needle tips just piercing the fabric.
Raise the presser foot, shift fabric half the turn, lower
presser foot and take one stitch. Raise the presser foot
again, complete the turn, and begin stitching in the
new direction.
25