Light Engine Removal Screws - Mitsubishi Electric Digital Light Processing WD-52525 Technical Training Manual

To access the screws securing the Light Engine, the
Airduct and DMD Fan Cover must be removed from
the rear of the set. Remove the 4 screws (c) shown in
Figure 3-2 to remove the cover.
With the Airduct removed, the Light Engine removal
screws are accessible from the rear of the set. Remove
the 4 screws (a) shown in Figure 3-3.
Figure 3-3: Light Engine (Rear View) Airduct & Fan Cover Removed
(a)
3-2
The Light Engine, metal base, and black support bracket
can be remove by pulling the assemble back towards
the rear and then upward.
CAUTION: Take care not to damage the
sponge around the Optical Unit Lens when
removing the Light Engine.