Accessing & Disconnecting The Lamp Ballast - Mitsubishi Electric Digital Light Processing WD-52525 Technical Training Manual

Acccessing & Disconnecting the Lamp Ballast
Remove the Right Rear Support Bracket
1) Remove the 3 screws (a) holding the rear right
support bracket, Figure 2-13.
2) Lift the upper cabinet slightly to remove the
support backet.
4 Screws
Figure 2-14: Ballast Shield Removal
Lift upper cabinet
slightly to remove
support.
(a)
Figure 2-13: Rear Right Support Removal
Remove the Lamp Ballast Shield
1) Remove the 4 screws, Figure 2-14.
2) Remove the Ballast Shield
Unplug the connectors to the Lamp Ballast
Refer to Figure 2-15.
Figure 2-15: Unplug Ballast Connectors
2-7
Unplug
Connectors