Chapter 2 - Disassembly; Front Disassembly - Mitsubishi Electric Digital Light Processing WD-52525 Technical Training Manual

Servicing the V26 models consists mainly of replacing
major components. These disassembly procedures are
geared to accessing and replacing these major compo-
nents:
• Light Engine
• Chassis
• Lamp Ballast
• PWB-POWER (Optional)
To order any of the major components, T/A (Technical
Advisory) authorizations is required.
Chapter 2
Disassembly
Front Disassembly is not required for accessing or re-
moval of the Chassis, but is required for Light Engine
replacement and to perform mechanical adjustments.
One new component used in the V26 and V25 models
is a reusable Wire Tie, shown in Figure 2-1. Do Not
cut the Wire Tie during disassembly. Lift the tab to re-
lease the Wire Tie lock.
LIFT TAB
Figure 2-1: Re-usable Wire Tie
2-1

Front Disassembly