Servicing The Lenticular Screen And Fresnel Lens; Lenticular Screen And Fresnel Lens Removal; Vs-A50 / Ws-A55 / Ws-A65; Pcb-2Hdw-1 (Input) - Mitsubishi Electric WS-A48 Service Manual

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

1. Removal of the Lenticular Screen and Fresnel Lens
CAUTION: Wear gloves when handling the Lenticular Screen and the Fresnel Lens.
This prevents cuts and finger prints. Do not place the Fresnel Lens in the sun.
This may cause fire and heat related injuries.
1. Remove the screen assembly as shown in the Cabinet Disassembly procedure.
2. Remove the Screen Holder by removing screws (a).
3. Slide the Lenticular Screen and Fresnel Lens from the Screen Frame.
Note: When separating the Lenticular Screen from the Fresnel Lens, use caution
while prying the Screen and Lens apart. Use a slot type screw driver, and
remove the pressure sensitive, double sided tape.
MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65
VS-A50
Page 11
WS-A55
WS-A65