Caller ID operation
CHRISTINE SMITH
888-722-7702
16
12:00
AM
ENTER LOCATION
_
12:00
AM
STORED
12:00
AM
Storing a call history entry in a two-
touch location
Use the following steps to store the telephone
number of a call history entry in a two-touch
memory location.
1.
When the telephone is idle, press CID/
enter the call history.
2.
Press
caller ID entry.
Press MEM. The screen shows
3.
ENTER LOCATION.
11-20
15
-OR-
If you need to add or remove the area code
or a 1 at the beginning of the number, do the
following:
a.
11-20 15
b.
11-20 15
Press a dial pad key (0 through 9) to choose the
4.
desired two-touch memory location to save the
displayed telephone number. The screen shows
STORED with a confirmation tone and then
returns to the call history.
5.
Press FLASH to return to idle mode.
•
If there is no telephone number in the displayed
call history entry when you press MEM in step
3, the telephone plays an error tone.
•
If the two-touch memory location you selected
in step 4 above is occupied, the new telephone
number replaces the old one. Take caution not
to replace entries you do not wish to delete
from the two-touch memory locations.
/
or
DIR
CID
Press SELECT continually to scroll through
the various dialing formats (area code +
seven-digit number, 1 + area code + seven-
digit number, seven-digit number or 1 +
seven-digit number).
Press MEM. The screen shows
ENTER LOCATION.
NOTES:
40
/
to scroll to the desired
to