Pasta Machine Features - Weston 01-0601-W User Manual

PASTA MACHINE FEATURES

NOTE: Only run the Pasta Machine for 15 minutes at a time. This will ensure
the motor does not overheat and remains in good working condition.
SAFETY COVER controls
a safety switch. When the
cover is open, the Pasta
Machine will not operate.
SLIDING SAFETY GUARDS
located in the Cover are
another safety feature. Slide
the Safety Guards over the
Smooth or Cutter Rollers that
are not in use. This will help
keep fingers and other objects
out to the unit while in use.
POWER SWITCH controls
the Pasta Machine two
speeds. Press 'I' for FAST
and press 'II' for SLOW. It is recommended to use your Pasta Machine at 'II'
(slow) speed until you are comfortable with operating the machine and handling
the dough. 'O' represents 'OFF' on the Power Switch.
ADJUSTMENT KNOB allows you to adjust the space between the Smooth
Rollers. To adjust the spacing between the Smooth Rollers, pull the Adjustment
Knob out slightly and rotate it until the desired setting number is aligned with the
line on the housing. Release the Adjustment Knob so that it rests against the
housing. The '1' setting is the widest setting: the '9' is the narrowest and will
produce very thin dough.
NOTE: ALWAYS turn the Pasta Machine 'O' off before adjusting the Adjustment
Knob. NEVER adjust the setting while the machine is operating.
SMOOTH ROLLERS can be used for kneading and preparing the pasta dough
before cutting to desired noodles, to create broad noodles or very thin sheets of
dough.
CUTTER ROLLERS are in two sizes – narrow for spaghetti and wide for
fettuccini.
WARNING
6
Adjustment
Knob
Power
Cord
WARNING!
KEEP FINGERS
CLEAR OF CUTTERS
AND ROLLERS!
Do Not Insert knives or
objects between the
Rollers or Cutters.
Before cleaning the Pasta Machine, turn the Pasta
Machine to the 'O' OFF position and remove the PLUG
FROM THE OUTLET/POWER SOURCE!
Sliding
Safety
Guards
Safety
Cover
Power
Switch