Grounding Instructions; Tips - Weston 01-0601-W User Manual

GROUNDING INSTRUCTIONS

GROUNDING
This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to fit
the proper grounding-type receptacle. The
appliance has a plug that looks like Figure
A. An adapter, Figure B, should be used
for connecting Figure A plugs to two-prong
receptacles. The grounding tab which extends
from the adapter must be connected to a
permanent ground such as a properly grounded
outlet box as shown in Figure C using a metal
screw.
EXTENSION CORDS
Use only 3-wire extension cords which have
3-prong grounding-type plugs and a 3-pole
cord connector that accepts the plug from the
appliance. Use only extension cords having
an electrical rating not less than the rating of
the appliance. Do not use damaged extension
cords. Examine extension cord before using and
replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.

TIPS

When using your pasta machine, always place it on a clean, stable surface, with
•
the power switch close to you for easy access.
Use a pasta drying rack to suspend the pasta for drying. If you are going to cook
•
your pasta right away, dry it on a pastry or cutting board.
When drying the pasta, separate the strands as much as possible so they do not
•
stick together during cooking.
Once the pasta is dry, wrap it tightly in plastic wrap and store in a plastic bag.
•
The pasta can be refrigerated for up to 24 hours.
When cooking homemade pasta, be sure to use plenty of water to prevent the
•
pasta strands from sticking together. You can also add a small amount of oil to
the water which prevents the strands from clinging to one another.
Fresh pasta typically cooks more quickly than packaged pasta. Your freshly
•
made spaghetti will be done after boiling for 5-8 minutes. Fresh fettuccini will
cook in 7-11 minutes, depending on desired doneness.
Grounding
Prong
Circuit
Grounding
Conductor
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
FIGURE A
FIGURE B
FIGURE C
5