Table of Contents
Advertisement
Chapter 3: Advanced Configuration
Advanced User Configuration
The Wireless Cable Gateway offers local management capability through a built in HTTP server
and a number of diagnostic and configuration web pages. These pages are available from http://
192.168.0.1 in RG and CH modes, and http://192.168.100.1 in CM Mode. Not all pages are
available in some modes.
Some information on two of the following web pages MUST BE configured, as explained in
Mandatory User Configuration: Status...Security web page and Basic...Setup web page.
In addition, more configuration and diagnostics are possible through the following additional
web pages, most of which are aimed at controlling the advanced networking functions of the
gateway.
To navigate between pages, use the hyperlinks on the sidebar which appear on the left side of all
pages.
Your cable company may not support the reporting of some items of information listed on your
gateway's internal web pages. In such cases, the information field appears blank. This is normal.
In the CM Mode, the simplest configuration mode of the gateway, or in the CH Mode, where you
have subscribed to an outside service (your cable company or another party) to remotely manage
your home network configuration, you will see only the Status and Wireless web page hyperlinks
in the sidebar, indicating only these page groups are available.
In the RG Mode, the mode where you manage your home network configuration, you will see
web page hyperlinks to all five page groups: Status, Basic, Advanced, Firewall, and Wireless. The
following section explains all of the available pages for all of the modes.
Illustrations contained in this document are for representation only.
Chapter 3
29
Advertisement
Table of Contents
