Table of Contents
Advertisement
Chapter 3: Advanced Configuration
Forwarding Web Page (Fig. 28)
For LAN <=> WAN communications, the gateway normally only allows you to originate an IP
connection with a PC on the WAN; it will ignore attempts of the WAN PC to originate a
connection onto your PC. This protects you from malicious attacks from outsiders. However,
sometimes you may wish for anyone outside to be able to originate a connection to a particular
PC on your LAN if the destination port (application) matches one you specify.
This page allows you to specify up to 10 such rules. For example, to specify that outsiders should
have access to an FTP server you have running at 192.168.0.5, create a rule with that address and
Start Port = 20 and End Port = 21 (FTP port ranges) and Protocol = TCP (FTP runs over TCP vs the
other transport protocol, UDP), and click Apply. This will cause inbound packets that match to be
forwarded to that PC rather than blocked. As these connections are not tracked, no entry is made
for them in the Connection Table. The same IP address can be entered multiple times with
different ports.
Fig. 28
Chapter 3
39
Advertisement
Table of Contents
