Your Pc: Installing A Pc Network Card - RCA DCW615 Manual

Your PC: Installing a PC Network Card

If your PC does not already support Ethernet or USB, you must install a network interface card.
Following is an example setup procedure:
1. Install an Ethernet card on your motherboard, following the card's directions.
2. Power up your PC and follow the Add New Hardware Wizard's instructions to install the
driver. When asked to restart your computer at the end of the installation, click Yes.
3. After restarting the system, right-click My Computer on the desktop, select Properties, click
the Device Manager tab, and then double-click Network adapters to confirm that the
Ethernet driver is properly installed.
Chapter 1
Chapter 1: Connections and Setup
9