Brother P-touch 2600 User Manual page 63

To type in an accented character:
1 Hold down c and press A. The message "ACCENT a – u / A – U?" appears on the display.
2 Press the key of the letter in the desired accented character.

To type a capital letter, hold down s (or hold down c and press s to turn
on Caps mode) before pressing the letter key.
3 Press f or w until the desired accented character appears enlarged within the frame
in the middle of the display.
4 Press _. The accented character is added to the text.

To type in a series of accented characters, hold down c before pressing _.
Then, continue adding accented characters by selecting them as explained in steps
2 and 3 , and holding down c while pressing _. Press just _ after
selecting the last character in the series.
EXAMPLE
To add the accented character "É":
1
Hold down
2
Hold down
c A
and press .
s E
and press .
A C C E N T
a — u / A — U ?
È
59