Brother P-touch 2600 User Manual page 108

RECALLING TEXT
To recall a stored text file:
1 Hold down c and press 8. The message "RECALL" appears on the display with the
file number and beginning of the most recently stored or recalled text.

To quit the Recall function without recalling text, hold down c and press 8 (or
press just * ).
An auto format layout that has been stored in the memory can be recalled when
you are asked to select a layout in the Auto Format function.
2 Press e or h to select the file number containing the text that you wish to recall. The
text stored under the selected file number is shown.

To see other parts of the selected text file, press f or w.
To display the text stored under other file numbers, press e or h.
3 Press _. Any text previously entered in the display is erased and the text stored under
the selected file number is recalled into the display.
EXAMPLE
To recall the text from file number 1:
1
Hold down
e
2
Press
played.
_
3
Press
104
c 8
and press .
h
or until file number 1 is dis-
.
R E C A L L
4 :
R E C A L L
1 : B i l l R e
1: _ i l l B R e y n