Brother P-touch 2600 User Manual page 46

INSTANT-LETTERING TAPE (RUB-ON TRANSFERS)
Instant-lettering tape is used to transfer your text onto paper. After printing the text onto
instant-lettering tape and cutting off the label, position the label with its non-printed side fac-
ing up on a sheet of paper. By simply rubbing the instant lettering tape's non-printed side with
the enclosed stick, you can transfer the text directly onto the paper.

Hold the tape very firmly and do not move it while rubbing the tape.
IRON-ON TRANSFER TAPE
Iron-on transfer tape is used to transfer your text onto garments using an iron.
1 Insert an iron-on transfer tape cassette, and then press p to print the text. If the TZ Cut
function is set to ON, the label will automatically be cut off after it is printed. If the TZ Cut
function is set to OFF, hold down c and press r to feed and cut off the label.
2 Iron the garment to flatten it before transferring the text.
3 Place the label on the garment at the location where you wish the text to be transferred.
4 Set the iron to cotton (150 to 180 ˚C), and then press down on the label with the iron for
about 15 seconds.
5 Allow the iron-on transfer to cool (for about 60 seconds), and then carefully remove the
backing paper.

White garments made from 100% cotton with a plain (smooth) surface are best for iron-
on transfers.
You can also make transfers to garments made from 100% linen or cotton/polyester
blends as long as they have a plain (smooth) surface.
42