Speed Dialing; Storing Phone Numbers - Sony TL-HP90 Service Manual

TL-HP90

Speed dialing

You can dial with a touch of a few buttons by storing a phone number on a
dialing button. You can store up to 10 different phone numbers.

Storing phone numbers

Lamp
(REDIAL/PAUSE)
Tips
If you enter a wrong number, start from the beginning.
•
Use the supplied directory to write down what you stored on the speed dialing
•
numbers.
To store a number to be dialed via Private Branch
Exchange (PBX)
Before entering a phone number in step 3, do as follows:
1
Enter the outside line access digit (e.g. 9).
2
Press (REDIAL/PAUSE).
To change a stored number
Store a new number as described above, and the old number will erased.
Making calls with speed dialing
1
Press (TALK).
The lamp lights up.
2
Press (SPEED DIAL).
3
Enter the desired speed dialing number ( (0) to (9)).
The phone number stored in the speed dialing number will be
dialed.
Note
If this unit is disconnected from the line for 10 minutes or more, the stored speed
dialing data is deleted from the memory.
4
1
Press (TALK).
The lamp lights up.
2
Press (PGM).
3
Enter the phone number
you want to store.
You can enter up to 16
digits for pulse dialing
or 15 digits for tone
dialing. Note that tone
and pause are each
counted as one digit.
4
Press (SPEED DIAL).
5
Press one of the dialing
buttons ( (0) to (9)) for
the phone number to be
stored.
And the number is stored.
6
Press (TALK).
The lamp goes off.