Table of Contents
Advertisement
If you receive a call while making an
intercom call
The intercom call is interrupted. You have to receive
a call either on the base phone or the handset.
Base phone: Return the receiver to the base phone
and pick it up again.
Handset: Press
Notes
• On the handset, a beep sounds before ringing.
• Return the receiver to the base phone even when you
answer the call on the handset.
On-hook dialing
You can make a call without picking up the receiver.
This is convenient when you wish to check who is
calling before answering or when you wish to listen
to a time announcement or weather forecast.
1 Press
on hook
the base phone.
You will hear a dial tone.
2 Dial the number using the number
buttons.
3 Pick up the receiver after you hear the
called party's voice.
If you just listened to time announcement or
weather forecast without picking up the receiver,
press
on hook
Notes
• If the called party's voice is low, you may not be able to
hear the voice clearly.
• If it is noisy, the called party's voice may be interrupted.
We recommend you use this function in a quiet place.
• If you have pressed a wrong button, press
start all over again.
Adjusting the speaker volume
The volume is factory-set to medium.
While listening to the voice or recorded messages
from the speaker,
press volume
Switching between on-hook dialing
and normal conversation
To switch from on-hook dialing to normal
conversation, pick up the receiver.
To switch to on-hook dialing while speaking into the
receiver, press
on hook
116
after the handset rings.
talk
with the receiver placed on
again to disconnect the line.
on hook
or
.
.
Using the phone
directory
Storing phone numbers in the phone
directory
You can dial a number by scrolling through the
phone directory, in which up to 20 phone numbers
can be stored.
Base phone:
1 Press
flash/program
with the receiver placed on the base
phone.
The smallest program number available is
displayed.
2 Press
or
program number.
3 Press
flash/program
4 Enter the phone number you wish to
store.
You can enter up to 20 digits. Make sure you
enter the area code first.
5 Press
flash/program
A beep will sound for confirmation.
Handset:
1 Press
flash/program
when a call is not in progress.
?
"ナマエ
" is displayed.
2 Enter the name using the dialing buttons.
You can enter up to 12 letters. If you do not enter
a name, go ahead to step 3.
and
3 Press
flash/program
4 Enter the phone number you wish to
store.
You can enter up to 20 digits. Make sure you
enter the area code first.
5 Press
flash/program
A beep will sound for confirmation.
When the directory is full
After step 1, "
C42
メモリフル" (on the handset) will be
"
displayed.
Tips
• If you enter a wrong number in step 4, erase the number
and start from the beginning.
• Even if you store the phone number with the area code,
the fee will be the same as that of a local call.
and
continuously
1
to display the desired
.
.
and
continuously
1
.
.
" (on the base phone) or
Advertisement
Chapters
Table of Contents
