Cradlepoint AER3100 User Manual page 81

User Manual / AER3100/AER3150
• Allow Traffic (default)
• Deny Traffic
With Allow Traffic selected, the device will act like a typical router without Threat Management enabled and
route traffic as usual. If security is a huge concern, however, you may wish to select Deny Traffic to stop all
traffic when Threat Management isn't working properly.
Application ID Logging: (Disabled by default.) The DPI engine can identify network traffic applications and send
this information to the system logs. Depending on your network traffic uses, application ID logging may send
huge amounts of data to the system logs. Cradlepoint recommends enabling a syslog server to manage this
information.
To view the logs, go to STATUS > System Logs. For configuration options, including syslog server setup, go to
SYSTEM > Administration > System Logging.
Signature Update Schedule
You can choose to have a different signature update
schedule for modems than for other WANs. This is
intended to protect against overages when data usage
limits for 3G/4G modems are restricted. For both Non-
Modem WANs and Modem WANs, first choose the
Frequency for updates:
• Never
• Daily
• Weekly
• Monthly
Next, choose the specific day and time. These updates
cause a minor network disruption, so schedule updates for
times with less critical traffic.
Signature Settings
View a list of all signature categories, all signatures, or
signatures within a category.
By default, the Operation Mode is set under Global
Settings. To edit this for a category or a particular
signature, select a line in the table and click Edit. Choose
from the following:
• Disabled
• Detect and Prevent – IPS mode
• Detect Only – IDS mode
©2015 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
81