Cradlepoint AER3100 User Manual page 41

User Manual / AER3100/AER3150
PSE
The AER3100 is compatible with the IEEE802.3af/
at standard(s) and supports a 62W total power
budget that can be used across up to four
Ethernet ports to support various compliant Class
I, II, III and IV devices (PD).
To configure your Power over Ethernet (PoE)
settings, go to NETWORKING > Local Networks >
PSE.
All PoE ports are enabled by default. To disable
PoE for a port or to change port priority,
select the port and click Edit. Set your desired
parameters, then click Update.
NOTE: If PoE is used for one or more high-power devices (up to 30W each), there will not be sufficient power
remaining to power devices in remaining Ethernet ports. By default, priority is assigned to lower-numbered
ports.
MAC FILTER & LOGGING
A MAC (Media Access Control) address is a unique identifier for a computer or other device. This page allows
you to manage clients by MAC address. You can filter clients by MAC addresses and/or keep a log of devices
connected to your router.
Filter Configuration
The MAC Filter allows you to create a list of devices that have either exclusive access (whitelist) or no access
(blacklist) to your local network.
Enabled: Click to allow MAC Filter options.
Whitelist: Select either "Whitelist" or "Blacklist" from
a dropdown menu. In "Whitelist" mode, the router
will restrict LAN access to all computers except those
contained in the "MAC Filter List" panel. In "Blacklist"
mode, listed devices are completely blocked from local
network access.
MAC Filter List (Whitelist or Blacklist)
Add devices to either your whitelist or blacklist simply
by inputting each device's MAC address.
NOTE: Use caution when using the MAC Filter to avoid
accidentally blocking yourself from accessing the
router.
MAC Logging Configuration
Enable MAC Logging: Enabling MAC Logging will cause the router to log MAC addresses that are connected to
the router. MAC addresses that you do not want to have logged (addresses that you expect to be connected)
should be added to the "Ignored MAC Addresses" list.
You can configure the router to send an alert if a connected device has a MAC address that the router doesn't
recognize. Go to SYSTEM > Device Alerts to set up these email alerts.
©2015 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
41