Cradlepoint AER3100 User Manual page 70

User Manual / AER3100/AER3150
• NHS: Multicast packets will be forwarded to each statically configured next hop server. This is default
and is typical for the configuration of an NHRP spoke.
• Dynamic: Multicast packets will be forwarded to each connected peer. This is typically used for an
NHRP hub.
You also have the option to create static mappings for this interface. Click Add in the table to open the static
mapping editor.
Protocol Address: Mapped endpoint to from protocol address to NBMA address
•
• Protocol Prefix: Optional prefix for protocol address
• NBMA Address: Destination mapped address from protocol address/prefix
• Register: This optional parameter specifies that a Registration Request should be sent to this peer on
startup (displays flag R in the static mapping table if selected)
• Proprietary OS: This should be enabled if the statically mapped peer is running proprietary OS (displays flag
C in the static mapping table if selected).
©2015 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
70