6 Update software
To get the best features and support, update
your product with the latest software.
Check software version
1
In HDMI ARC source, on the remote
control, press TREBLE -, BASS -, and
Volume - in sequence within three
seconds.
» On the display panel, the current
software version is displayed.
Update software via USB
1
Check the latest software version on
www.philips.com/support.
•
Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the download if zipped, and
make sure that the unzipped folder is
named "HTL5130B.bin".
b Put the "HTL5130B.bin" folder in the
root directory.
3
Connect the USB storage device to the
USB connector of this product.
4
Press HDMI ARC on the remote control,
within 6 seconds press
Volume + once, then hold down SOUND.
» If an upgrade file is detected, [UPG]
will be fast flashed.
» If an upgrade file is not detected,
[ERROR] will be slowly flashed.
5
Press
to start the update.
» [UPG] is displayed.
12
EN
twice, and
6
Wait until the update is completed.
» If the update is complete, this product
automatically turns off and on again.
Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this product.
•
The upgrade may take around 6 minutes.