Page 1
Always there to help you Register your product and get support at www.philips.com/welcome HTL5120 Question? Question? Contact Contact Philips Philips User manual...
Contents 1 Important Safety Care for your product Care of the environment Trademarks Help and support 2 Your SoundBar Main unit Remote control Connectors 3 Connect Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices 4 Use your SoundBar Adjust the volume...
Secure the reach of children. Ensure that the battery wall mount to a wall that can support the compartment is completely secure after combined weight of the product and the you replace the battery. wall mount. Koninklijke Philips Electronics...
Your product is designed and manufactured ® registered trademarks owned by Bluetooth with high quality materials and components, SIG, Inc. and any use of such marks by Philips is which can be recycled and reused. under license. Never dispose of your product with other household waste.
Congratulations on your purchase, and model number. welcome to Philips! To fully benefit from Alternatively, you can contact Philips Consumer the support that Philips offers, register your Care in your country. Before you contact SoundBar at www.philips.com/welcome. Philips, note down the model number and serial number of your product. You can find this...
• OPTICAL: Lights up when you switch to optical input source. • AUX/Bluetooth: Lights up when you switch to analog input source. Blinks when you switch to Bluetooth mode. • COAXIAL: Lights up when you switch to coaxial input source. c Volume indicator/V.
Switch your audio source to the coaxial Rear connectors connection. f MUSIC iLINK Switch your audio source to the MUSIC iLINK connection. g AUTO VOLUME ON/OFF Turn auto volume on or off. h AUDIO SYNC +/- a MUSIC iLINK Increase or decrease audio delay. Audio input from an MP3 player.
3 Connect f DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. g DIGITAL IN-OPTICAL This section helps you connect your SoundBar Connect to an optical audio output on the to a TV and other devices. TV or a digital device.
• The HDMI ARC connector on the TV Connect audio from TV and might be labeled differently. For details, other devices see the TV user manual. On your TV, turn on HDMI-CEC Play audio from TV or other devices through operations.
4 Use your Using a coaxial cable, connect the COAXIAL connector on your SoundBar SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. This section helps you use the SoundBar to play audio from connected devices.
Surround sound mode Night mode Experience an immersive audio experience with For quiet listening, decrease the volume of loud surround sound modes. sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. Press V.SURR repeatedly to switch Press NIGHT MODE ON/OFF to turn surround mode on or off.
• If you want to connect your SoundBar with another Bluetooth device, disable the currently connected Bluetooth device. • Philips does not guarantee 100% compatibility with all Bluetooth devices.
30% THD) / 96W RMS (+/- 0.5 dB, in accident, injury or damage. If you have any query, 10% THD) contact Philips Consumer Care in your country. • Frequency response: 20 Hz-20 kHz / •...
• 2 x AAA-R03-1.5 V the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect.
Page 15
Bluetooth A device cannot connect with the SoundBar. • The device does not support the compatible profiles required for the SoundBar. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.
Need help?
Do you have a question about the HTL5120/61 and is the answer not in the manual?
Questions and answers