Page 1
Always there to help you Register your product and get support at www.philips.com/welcome Question? Contact Philips User manual HTL5120_F7_UM_EN.indd 1 2013/1/31 9:39:38...
Contents 1 Important Important safety instructions Care for your product Care of the environment Help and support 2 Your SoundBar Main unit Remote control Connectors 3 Connect Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices 9 4 Use your SoundBar Adjust the volume Choose your sound...
1 Important Read and understand all instructions before you • Use only with the cart, stand, tripod, use your product. If damage is caused by failure bracket or table specified by the to follow instructions, the warranty does not manufacturer or sold with the apparatus. apply.
Class II equipment symbol with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling center in your area. This symbol indicates that the unit has a double Never dispose of your product with other insulation system.
Alternatively, you can contact Philips Consumer Care in your country. Before you contact Philips, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.
COAXIAL: Lights up when you switch • Congratulations on your purchase, and to coaxial input source. welcome to Philips! To fully benefit from c Volume indicator/V. SURR indicator the support that Philips offers, register your • When you change volume, volume SoundBar at www.philips.com/welcome.
Switch your audio source to the coaxial connection. f MUSIC iLINK Switch your audio source to the MUSIC iLINK connection. g AUTO VOLUME ON/OFF Turn auto volume or or off. Bluetooth h AUDIO SYNC +/- Increase or decrease audio delay. i +/- (Volume) Increase or decrease volume.
Page 9
g DIGITAL IN-OPTICAL Rear connectors Connect to an optical audio output on the TV or a digital device. a MUSIC iLINK Audio input from an MP3 player. Bottom connectors a HDMI IN 1 Connect to the HDMI output on a digital device.
3 Connect • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC This section helps you connect your SoundBar operations. For details, see the TV user to a TV and other devices.
Using a coaxial cable, connect the Connect audio from TV and COAXIAL connector on your SoundBar other devices to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be Play audio from TV or other devices through labeled DIGITAL AUDIO OUT.
4 Use your Surround sound mode SoundBar Experience an immersive audio experience with surround sound modes. Press V.SURR to select a surround mode. [Virtual Surround]: Creates a highly • This section helps you use the SoundBar to play surround listening experience The audio from connected devices.
Bluetooth device, disable the currently connected device through your SoundBar speakers. Bluetooth device. What you need • Philips does not guarantee 100% compatibility with all • A Bluetooth device which supports Bluetooth devices. Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR.
• no audio/video playback is detected from a connected device. Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. In AUX mode, within three seconds, press TREBLE+, VOL-, and BASS+. » When the factory settings restore is complete, the SoundBar automatically switches off and restarts.
Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. • Secure the wall mount to a wall that can support the combined weight of the product and the wall mount.
6 Product • tweeter: 12 ohm • Speaker drivers: 2 x 102 mm (4") woofer specifications + 2 x 25.4 mm (1") tweeter • Dimensions (WxHxD): 1010 x 81 x 154 mm • Weight: 3.9 kg Note Wall mount • Specifications and design are subject to change without •...
• The SoundBar is already connected with If you still have a problem, get support at www. another Bluetooth device. Disconnect the philips.com/support. connected device, then try again. Quality of audio play from a connected Main unit Bluetooth device is poor.
Warning: Changes or modifications made to this equipment not expressly approved by This set complies with the FCC rules, Part 15 Philips may void the FCC authorization to and with 21 CFR 1040.10. Operation is subject operate this equipment. to the following two conditions:...
Page 20
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD- to it. This Limited Warranty does not apply to any non-Philips UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE hardware product or any software, even if packaged or sold LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR with the product.