Adjusting The Viewfinder Details - Sony F23 Operation Manual

Item Setting
SAFETY Set to ON to display the safety zone for the
selected aspect marker, and specify the
range.
MASK Set to ON to make the areas outside the
selected aspect marker dimmer, and select
the mask level (0 to 15).
3-6-5 Adjusting the Viewfinder
Details
You can adjust the image on the viewfinder screen to
obtain a clearer view, using the <VF DETAIL> page of the
USER (OPERATION) menu. This adjustment does not
affect the image being recorded.
<VF DETAIL> page
< V F D E T A I L >
V F 1 :
B
V F 2 :
L E V E L :
C R I S P :
Item Function
VF1 Turn the VF detail adjustment function on or
off for the viewfinder connected to the VF1
connector.
VF2 Turn the VF detail adjustment function on or
off for the viewfinder connected to the VF2
connector.
LEVEL Set the level (0 to 100%) of the VF detail
adjustment function.
CRISP Set the noise crispening level (–99 to 99).
3-6-6 Setting the Zebra Indication
You can display a zebra pattern(s) on the viewfinder and
monitor screen.
Zebra (default settings)
1 (70%)
Setting the zebra indication is performed on the <ZEBRA>
page of the USER (OPERATION) menu.
U 0 4
O F F
O F F
2 5 %
0
2 (100%)
<ZEBRA> page
< Z E B R A >
V F 1
V F 2
M O N I T O R
V B S
Z E B R A T Y P E
Z E B R A 1 L E V E L :
W I D T H :
Z E B R A 2
Item Function
1) Turn the zebra indication on the
VF1
viewfinder connected to the VF1
connector on/off.
Turn the zebra indication on the
1)
VF2
viewfinder connected to the VF2
connector on/off.
1) Turn the zebra indication on the monitors
MONITOR
connected to the MONITOR OUT
connectors on/off.
1) Turn the zebra indication on a device
VBS
connected via the REMOTE connector
on/off.
ZEBRA TYPE Select the zebra(s) to be displayed:
1, 2, or 1&2
ZEBRA1 LEVEL Adjust the level (0 to 109%) of the zebra
1 indication (factory setting: 70%).
WIDTH Adjust the width (0 to 30%) of the zebra 1
indication (factory setting: 10%).
ZEBRA2 Adjust the level (50 to 109%) of the zebra
2 indication (factory setting: 100%).
1) These items can also be set on the <CHAR/MARK MIX> page.
3-6-7 Setting the Cursor Indication
You can display a cursor on the viewfinder and monitor
screen.
Example: Box cursor
Activating/deactivating the cursor
indication
The <CHAR/MARK MIX> page of the USER
(OPERATION) menu permits you to activate/deactivate
the cursor indication for each output.
Viewing and Setting the Viewfinder Displays
U 0 5
: O F F
B
: O F F
: O F F
: O F F
: 1
7 0 %
1 0 %
: 1 0 0 %
49