Lcd Display; Getting Started; Insert Battery; Placement Of Unit - Oregon Scientific JM889NR User Manual

LCD DISPLAY

Icon Description Explanation
Clock signal Indicates the condition
reception of radio reception.
Low Battery Appears when power
is low.
Alarm-on Appears when alarm is
activated.
Alarm Time Appears when alarm time
Indicator is displayed.

GETTING STARTED

INSERT BATTERY

1. Remove the battery compartment cover (see FIG 2).
2. Install the batteries, matching the polarities.
3. Press Reset after each battery replacement.
NOTE Replace the batteries when
or when the display is dim.

PLACEMENT OF UNIT

The clock can be mounted on a wall or stand on a
flat surface.
Method
Table
Stand
Wall
Mount

CLOCK

CLOCK RECEPTION

This clock is designed to synchronize its clock
automatically with a clock signal.
displays,
Slide to select the desired region (EU/UK/US).
Region
EU
UK
US
3
Instruction
Pull out the table stand (see FIG 2)
at the back of unit, then place the main
unit on a flat surface.
a) Position and insert the screw into
the desiredposition.
b) Leave ample space between the
wall and the screwhead. Check the
screw is securely inserted.
c) Fit the unit's Wall mount hole onto
the screw head.
Signal
DCF
MSF
WWVB