INTRODUCTION Thank you for selecting the Oregon Scientific Jumbo RF Wall Clock with Night Sensor. This device is designed to give you many years of reliable service, including the following conveniences: Jumbo RF Wall Clock with Night Sensor Radio-Controlled Calendar Clock...
BACK VIEW KEY FEATURES - MAIN UNIT FRONT VIEW / LCD SYMBOLS 1. Channel 1 / 2 Ch.1 or Ch.2 will appear when the related remote 1. Wall Mount Hole nightlight sensor has been activated. 2. Table Stand 2. Alarm On Icon 3.
TABLE STAND BACK VIEW The wall clock can be placed on a table using the table stand. KEY FEATURES - NIGHTLIGHT WITH MOTION SENSOR FRONT VIEW 1. Wall Mount Hole 2. Battery Compartment Uses 3 x UM-3 / AA 1.5V batteries. 3.
SAFETY AND CARE GETTING STARTED SAFETY PRECAUTIONS HOW YOUR CLOCK WORKS WITH THE NIGHTLIGHT - OVERVIEW Please observe the following safety precautions when setting up and using this product. The clock can be set independently to give you time, calendar and alarm facilities. LCD panel - The LCD panel is made of glass, The nightlight can be set independently to light and may break if the unit is dropped.
Clock: NOTE The nightlight has a Power ON / OFF switch to help conserve power. Use the AC adaptor when using the nightlight for long periods of time. The batteries are a good power source for back-up usage. ABOUT RADIO RECEPTION This clock can automatically synchronize the date and time with official time-keeping organizations in Frankfurt (Germany) and Rugby (England).
HOURLY CHIME CLOCK / CALENDAR The hourly chime function when set to ON will beep CLOCK / CALENDAR DISPLAY once at the beginning of every hour, and the chime There are 3 types of clock display: icon will show on the display. TEMPERATURE Calendar / Calendar /...
ACTIVATING / DEACTIVATING THE ALARM 6. The Motion Start Hour will flash. To activate or deactivate the alarm: 1. Press the ALARM button. 2. Press the button. When the alarm icon appears on the display, the alarm is activated. When the alarm icon does not appear on the display, 7.
NOTE When the motion sensor on the nightlight is RESET BUTTON turned on, it needs approximately 2 minutes to warm Insert a thin blunt instrument into the hole below Reset up before giving a response. to return to the default settings. The default settings are: Clock Time: 12.00 PM...
TECHNICAL SPECIFICATIONS TYPE DESCRIPTION Main Unit Dimensions L x W x H 297 x 25 x 165 mm (11.69 x 0.98 x 6.5 inches) Weight (without battery) 622 g (1.37 lbs) Remote Unit Dimensions L x W x H 88 x 43 x 112 mm (3.46 x 1.69 x 4.41 inches) Weight (without battery) 140 g (0.31 lbs) Temperature...
TROUBLESHOOTING PROBLEM SYMPTOM REMEDY Clock time is not No radio signal reception Place the main unit far away from PCs, correctly set phones, and other electronic equipment and near a windowsill. Wait for at least 24 hours No alarm Alarm does not sound Turn on the alarm setting Operation not normal Certain functions do not...
Visit our website (www.oregonscientific.com) to learn of the Low Voltage Directive 73 / 23 / EC, the EMC more about Oregon Scientific products such as digital Directive 89 / 336 / EC and carries the CE marking cameras; MP3 players; children’s electronic learning accordingly.
Page 13
2004 Oregon Scienfitic. All rights reserved. P/N: 086-003532-010...