Cleaning The Smart Brewing Orb - Krups T.O by Lipton Instruction Manual

CLEANING THE SMART BREWING ORB

To maintain the Smart Brewing Orb clarity of your T.O by Lipton machine, we
recommend cleaning the brewing chamber once a month.
Cleaning tablets are available on the website www.TO-Lipton.com.
Step 1
Switch on your machine. Fill the water tank with
potable water to the Maximum mark (MAX).
Step 2
Place a large vessel (>500ml) on the cup tray
underneath the pouring spout.
Step 3
Unwrap the T.O by Lipton cleaning tablet. Remove
the holder with the strainer and place one cleaning
tablet onto the filter mesh of the strainer as shown.
Step 4
Slide the strainer and holder with the cleaning tablet
into the machine.
Ensure the holder and strainer are fully
inserted.
Step 5
Simultaneously press the weak strength button with
both of the cup size buttons until the holder moves
up and the cleaning cycle starts.
Please note cleaning will take about 10 minutes and
the tea strength lights will flash
to indicate that cleaning is in progress.
44
10 min