Replaying, Erasing, Or Changing A Voice Command - Nokia 7610 User Manual

78 Copyright © 2004 Nokia. All rights reserved.
Adding an application to the list
Assign voice commands to other applications that are not listed in the Voice commands
main view.
1 In the Voice commands main view, select Options→
2 Available applications are displayed. Scroll to the application that you want to add and
press Select.
3 Add a voice command to the new application.
application" on page 77.
Starting an application using a voice command
1 In standby mode, press and hold
is displayed.
2 When you are starting an application by saying a voice command, hold the phone at a
short distance away from your mouth and pronounce the voice command clearly.
3 The phone plays the original voice command and starts the application. If the phone
plays the wrong voice command, press Retry.

Replaying, erasing, or changing a voice command

To replay, erase, or change a voice command, scroll to the item that has a voice command
(indicated by ), select Options, and then either:
• Playback - To listen to the voice command again.
• Delete - To erase the voice command.
• Change - To record a new voice command. Press
New application.
See "Adding a voice command to an
. A short tone is played and the note
Start to record.
Speak now