Starting An Application Using A Voice Command; Replaying, Erasing, Or Changing A Voice Command - Nokia 6260 User Manual

4. After recording, the phone plays the recorded command and the note
voice command is displayed. If you do not want to save the recording, press
Quit.
5. When the voice command has been successfully saved, the note
command saved is displayed and a beep sounds. A symbol
to the application.

Starting an application using a voice command

1. In standby mode, press and hold
Speak now is displayed.
2. When you are starting an application by saying a voice command, hold the
phone a short distance away from your mouth and pronounce the voice
command clearly.
3. The phone plays the original voice command and starts the application. If the
phone plays an incorrect voice command, press Retry.

Replaying, erasing, or changing a voice command

To replay, erase, or change a voice command, scroll to the item that has a voice
command (indicated by
• Playback - Listen to the voice command again.
• Delete - Erase the voice command.
• Change - Record a new voice command. Press
Copyright © 2004 Nokia. All rights
. A short tone is played and the note
), select Options, and then either:
Voice
can be seen next
Start to record.
Playing
123