Gree GWH09RB-K3DNA2C Service Manual page 87

Service Manual
9. Disassemble motor and motor support
Motor support
Remove the 4 tapping screws fixing the motor.
Pull out the lead-out wire and remove the
Motor
motor. Remove the 2 tapping screws fixing
the motor support. Lift motor support to re-
move it.
10. Disassemble Clapboard Sub-Assy
Clapboard Sub-Assy
Loosen the screws of the Clapboard Sub-Assy .
The Clapboard Sub-Assy has a hook on the
lower side. Lift and pull the Clapboard Sub-Assy
to remove.
Installation and Maintenance
84