Viewing Recorded Files On A Computer - NextBase NBDVR101 Instruction Manual

SETUP MENU (CONTD.)
6. G Sensor
Adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will
automatically protect the current recording in event of a collision.
Settings: Off, Low, Medium or High
Default: Medium
7. TV Frequency
Set the audio / video frequency output format for your television set.
Settings: 50Hz or 60Hz
Default: 50Hz
8. TV Mode
Set the audio / video output format for your television set.
Settings: PAL or NTSC
Default: PAL
9. Default Settings
Reset the iN-CAR CAM to the default settings.
10. Version
Displays the firmware version of your iN-CAR CAM.

VIEWING RECORDED FILES ON A COMPUTER

The recorded video files are of a standard AVI format. Most computers are capable of playing these
files through a suitable generic Media player, such as VLC Media Player.
Take the video files from the iN-CAR CAM and play them directly on your computer. This can be
performed in two ways.
1. Remove the MicroSD card from the iN-CAR CAM and insert this in your computer's card reader
(adaptor may be required). Copy the files to your computer, or play them directly from the MicroSD
card.
2. Connect the iN-CAR CAM to your computer via the supplied USB cable (see next page). Copy the
video files to your computer BEFORE attempting to play them.
21