Sr interface with quick-connect dvi/hdmi - sr with hsds and the conceal wall mounting system for the vaddio hd-18 robotic pan/tilt/zoom camera (16 pages)
Page 2
WallVIEW Universal CCU Cat-5 Version Inside Front Cover - Blank Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 2 of 20...
Compliance and CE Declaration of Conformity - Universal CCU and EZIM CCU ..........17 Appendix 1: Cable Pin-outs for the Quick-Connect CCU System ................18 Appendix 2: New Commands for the CCU Scene Selection .................. 19 Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 3 of 20...
Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions. Do not connect Power over Ethernet (PoE) cables directly to the RJ-45 ports on the device as damage may result.
One (1) CONCEAL Mount in Black with complete hardware kit One (1) 998-1001-232, DE-9F to RJ-45F EZCamera Control Adapter One (1) Manual for WallVIEW Universal CCU Systems Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 5 of 20...
One (1) CONCEAL Mount in White with complete Hardware kit One (1) 998-1001-232, DE-9F to RJ-45F EZCamera Control Adapter One (1) Manual for WallVIEW Universal CCU Systems Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 6 of 20...
Program in a multi-camera CCU installation. A tally command will also be sent to the camera via RS-232 to light the LED on cameras with on-board tally lights (Vaddio HD Series cameras). Image: Close up View of the Universal CCU HD-20 and HD-18 Control Panel HD-18/HD-20 Keypad Controls from (left to right): Touch the button with the parameter to be controlled and adjust the value with the encoder (big rotary knob), then touch the cancel button to exit.
HD-SDI on Edge Mount Carrier Class, Gold BNC-F (supports 3Gb/s Single Link 1080p/60 HD-SDI) The universal CCU supports all the resolutions of the HD-20, HD-19 and HD-18 PTZ cameras. Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 8 of 20...
CAT-5 CCU HD-20 CAT-5 CCU HD-18 GAMMA AUTO KNEE BLUE DETAIL BLUE AUTO DETAIL CHROMA IRIS AUTO CHROMA IRIS AUTO PEDESTAL GAIN AUTO PEDESTAL GAIN AUTO Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 9 of 20...
Page 10
5) Fluor Hi (fluorescent high) 6) Outdoor The Version Menu screen displays the software versions of the Vaddio cameras attached as a convenience to the operator. The versions shown include the zoom module, the motors and the camera. Version Display Menu...
If the bracket is to be mounted on a 2-gang wall box, use the screws supplied with the wall box cover plate to attach the CONCEAL Wall Mount Bracket. If mounting to drywall with wall anchors, use the four (4) quality wall anchors/screws provided Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 11 of 20...
Page 12
(2) tabs are inserted. CONCEAL Lower Cover Plate with Locking Tabs CONCEAL Lower Cover Plate locked in place Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 12 of 20...
Page 13
Step 6: Connect System Power Connect the Vaddio 36 VDC power supply to the Quick-Connect Universal CCU Interface and an AC outlet. The CCU will power the camera via the Cat-5 cable. The camera will “Home” to a centered position ready for control information from the Universal CCU.
The VIDEO Cat-5 cable uses all four pairs for video. The RS-232 Cat-5 provides communication to the camera for CCU and PTZ control. These Cat. 5 cables can be run up to 500’ (152.4m). See Appendix 1 for wiring and pin-out information. NOTE: Daisy-Chain configurations are not supported. Vaddio WallVIEW Universal CCU Cat-5 Version. Document Number 342-0512 Rev C Page 14 of 20...
Optimizing the CCU settings will help achieve maximum performance from the system. Difficult lighting is one of the most challenging problems video system integrators face. The Vaddio CCU will provide the flexibility to fine tune for variables such as cable length, day/night lighting transitions and lighting color temperature.
Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.
81 01 043F 00 7p FF (where the p is scene 1, 2 or 3.) A Vaddio PTZ camera must be connected to the QCCU for the scene Set, Recall, and Reset to operate correctly. This command set communicates with the QCCU and the camera simultaneously.
Need help?
Do you have a question about the Quick-Connect Universal Cat-5 CCU and is the answer not in the manual?
Questions and answers