Projecting Srgb-Compatible Pictures - Panasonic PT-L735NTE Operating Instructions Manual

NOTE:
B This should normally be set to
"AUTO1" or "AUTO2". If the
signal is of such poor quality
that the correct format cannot
be automatically distinguished,
change the setting manually to
the required TV system.
Projecting sRGB-
compatible pictures
sRGB is an international colour
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colours in
sRGB-compatible pictures to be
reproduced more faithfully, make
the following settings.
# # Press the F F or G G button to
select "PICTURE MODE", and
then use the I I or H H button to
select "NATURAL".
$ $ Press the F F or G G button to
select "COLOR TEMP.", and
then use the I I or H H button to
select "STANDARD".
% % Press the STD (standard)
button on the remote control
unit.
& & Select the LAMP POWER item
in the OPTION menu by
pressing the F F or G G buttons
and set to "HIGH" by pressing
the I I or H H buttons.
NOTE:
B sRGB is only enabled when
RGB signals are being input .
E -39
NGLISH