NEC Univerge DT750 User Manual page 64

When changing the file name, go to the next
step (STEP 19).
When not changing the file name, go to
STEP 20.
STEP 21:Press BK soft key once to delete the default
file name and then enter a new file name by
using the digit keys.
Note: For details on character entry method, see
NUMBER REDIAL
Note: A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
Note: To delete an entered character, press BK soft
key.
STEP 22:Press
(Enter)
downloading process. While downloading a
file, the LCD displays "Downloading..." first
and then "Saving...".
Note: Be sure not to turn OFF the DT750 while "Sav-
ing..." is displayed on the LCD.
STEP 23:After the downloading process is complete,
LAST
in chapter 4 Basic Operation.
or Exec soft key to start the
the display changes as follows:
Download Complete!
Reset the DT750 by pressing Exit soft key.
Note: When the downloading process ends in failure,
"Downloading Failed!" is displayed on the LCD.
Check to see the following and then make a retry.
Check Points
Download file is not placed
in the specified directory.
A different file name is
specified between DT750
and FTP/TFTP server.
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
The power to FTP/TFTP
server or network
equipment is OFF.
LAN cable is disconnected.
57
Exit
Actions
Place the download file in
the specified directory.
Set the same file name
from both DT750 and FTP/
TFTP server.
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.