NEC Univerge DT750 User Manual page 12

1.
(b) Redial
(Last Number Call, Speed Calling-Station/
Group)
Press key to activate redial feature. Press redi-
al and scroll back through numbers that have
been dialed. When the desired number is dis-
played,
press the or # key to activate dialing.
Note: A-law Countries [Australia, Russia, Latin America,
UK, Middle near East, other Asian nations]: #
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:
(c) Directory
Pressing this key opens Directory menu. For de-
tails on Directory service, see
OPERATION.
(d) Enter
DT750 has shortcut menu for frequently-used
features. Use this key to display the shortcut
menu (see SHORTCUT
the selected item in the menu.
Also, this key is used as cursor-movement key on
the local menu of the telephone.
Move the highlighted area one line up
UP
the screen.
Move the highlighted area one line
DOWN
down the screen.
4.DIRECTORY
MENU) and determine
LEFT Go back to the previous screen.
Go to the screen corresponds to the
RIGHT
highlighted menu item.
Go to the screen corresponds to the
Enter
highlighted menu item.
(13)Speaker
Controls the built-in speaker which can be used for
Hands Free dialing/monitoring.
LED on key lights when key is active.
* All standard IP versions include support for full
duplex hands-free mode. All TDM and IP enabled
versions are half duplex hands-free mode.
(14)Transfer
Allows the station user to transfer established calls
to another station, without attendant assistance.
(15)Hold
Press this key to place an internal or external call
on hold.
5