Table of Contents
Advertisement
Memory full
There are 80 phone book memories.
When all memories have been used in the phone the LCD will show
memory full. The user will need to delete entries in order to enter new
contacts.
Intercom
The intercom feature is activated by pressing and holding the "R/C" key for
3 seconds:
In standby mode:
Press "R/C" key for 3 seconds and the numbers of all registered
pendants will show on the display as well as an invitation to enter the
pendant number you wish to call.
The destination pendant will ring with the melody defined for internal
call.
Press the red button on the pendant to accept the call.
Once the internal call is connected, the white light will shine on the top
of the pendant.
To end intercom mode, either hang up the base unit or pendant.
Call transfer
To transfer the call from the base to the pendant.
Press "R/C" key for 3 seconds during conversation and you will be
invited to enter the pendant number you want the call to be transferred
to.
The chosen pendant will ring with the melody defined for internal call.
Press the red button on the pendant to accept the call.
The call will be connected to the pendant. To complete the transfer of
the call, hang up on the base unit.
The call will transfer back to the base unit if there is no answer on the
pendant within 1minute, you can press
or pick up the handset to resume the conversation.
key once on the base unit
21
Advertisement
Table of Contents
