Pendant(Pendt) Set-Up - Lifemax 1225 User Manual

The user will be invited to press
heard once the setting is confirmed. Base unit will activate after several
seconds with LCD flashing once and then connect the pendant.
Note: After ex-factory setting succeeds, room monitor password will be
cleared away. Phonebook/One touch memory/Two touch memory and SOS
number will all be saved to avoid being erased. The volumes settings for
Ring, Microphone and Receiver will restore to ex-factory.
DEL PENDT:
To delete a pendant registration from the base:
If the pendant has been deleted, it will not work and needs to be registered
with the base again.
Press
Press
Press or
pendant you want to delete.
Press
registered pendants on the base and the pendant will behave according
to the out of range conditions together with an alert sound.
PENDANT (PENDT) SET UP
To change pendant settings:
Press the
item.
Press
The LCD will show the registered pendant. Example: PENDT1.
Press
Then proceed as below:
INT RING:
To change the pendant ring tone or volume for internal calls:
key, then use
key to enter.
key to scroll through the pendant names list to find the
key to confirm. The pendant will be deleted from the list of
key and use
key to enter.
key to confirm.
key to confirm, a sound will be
or key to find "DEL PENDT" item.
or key to find "PENDT SETUP"
13