Fuel Filter - Echo SRM-280U Operator's Manual

Hide thumbs Also See for SRM-280U:

Table of Contents

SRM-280U

Fuel Filter

Level 1.

Parts Required:

REPOWER

Fuel is VERY flammable. Use extreme care when mixing,

storing or handling, or serious personal injury may result.

1. Use a clean rag to remove loose dirt from around fuel cap

and empty fuel tank.

2. Pull the fuel filter from the tank.

3. Remove the filter from the line and install the new filter.

Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for

sale in the United States to be equipped with a special low permeation fuel supply hose between the

carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply

hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to

$37,500 may be enforced for using an un-certified replacement part.

Spark Plug

Level 2.

Parts Required:

REPOWER

Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada)

otherwise severe engine damage may occur.

1. Remove spark plug and check for fouling, worn and rounded

center electrode.

2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage

engine.

3. Adjust spark plug gap by bending outer electrode.

4. Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf).

X7502310910

AIR & FUEL FILTER KIT.

Tune-Up Kit

MAINTENANCE

0.65 mm (0.026 in.)

Table of Contents