Balance And Adjust Unit - Echo SRM-280U Operator's Manual

SRM-280U
5. Connect two (2) ignition stop leads (C,D) from throttle cable
tubing to two (2) ignition leads (C,D) on engine.
6. Gather ignition wires and position behind air filter case.
7. Install air filter and cover.

Balance and Adjust Unit

1. Loosen harness clamp screw.
2. Put on harness and attach unit to harness.
3. Slide harness clamp up (A) or down until unit balances with
head approximately 50-75 mm (2-3 in.) from the ground.
4. Tighten harness clamp screw.
5. Loosen upper U-Handle clamp screws (B), and position
U-Handle for comfortable operation.
6. Tighten U-Handle clamp screws and 8 mm clamp hex bolt
securely.
18
A
ASSEMBLY
C
D
B
X7502310910
© 3/2015 ECHO Inc.