Makita 9500D Instruction Manual page 9

Switch action
To start the tool, simply press the switch
button. Release the switch button to stop.
For continuous operation, press the switch
button fully, then release it. To stop the
tool from the locked position,
press
the
switch button fully again, then release it.
I \
Switch button
CAUTION
:
Before inserting the battery cartridge into the tool, be sure the switch button actuates
properly.
Sharpening with flexible grinding wheel
Hold the tool firmly. Turn the tool on and
then apply the wheel to the workpiece
so
that the wheel and blade angle are parallel.
Move the wheel constantly in the direction
shown on the right,
so
that grinding action
will be even.
WARNING
:
0
I t should never be necessary to force the tool. Forcing and excessive pressure could
cause dangerous wheel breakage.
.Continued use of
a
worn-out wheel may result in wheel explosion and serious personal
injury. Flexible grinding wheel should not be used after
it
has been worn down to
75
mm
(3")
in diameter. Use
of
the wheel after this point
i s
unsafe and
it
should be re-
moved from service and rendered unusable by intentional destruction.
MA1 NTENANCE
CAUTION
:
Always be sure that the tool is switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELlABl LITY, repairs, maintenance or adjustment
should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
9