Makita 9500D Instruction Manual page 8

Installing or removing flexible grinding wheel
CAUTION :
Always be sure that the tool is switched off and the battery cartridge i s removed before
installing or removing the wheel.
Fit the wheel and outer flange onto the
spindle and temporarily secure with the
screw.
Screw
Outer flange
I
To tighten the screw, press the shaft lock
firmly so that the spindle cannot revolve,
then use the hex wrench to securely
tighten the screw clockwise.
Hex wrench
Screw
To remove the wheel, follow the installation procedure in reverse.
8