Dyson AM10 Operating Manual page 13

Once a week
Turn the machine into standby mode/'OFF'.
Unplug from the mains electricity supply.
1
Wipe over air loop amplifier, paying close
attention to the air gaps. Wipe with a lint-free
microfiber cloth.
2
Empty the water. Rinse and wipe over all surfaces.
Repeat if necessary.
3
Empty the trough and wipe over all surfaces. Small
spillages may occur. Do not rinse under the tap or put in
the dishwasher. While not dangerous, care should be taken
to avoid water entering the inlets. Wipe the exterior with a
lint free microfiber cloth.
13