Dyson AM10 Operating Manual page 11

Humidity percentage
%
A Automatic mode
On/off
Press and hold the power button on
the machine to adjust the humidity
setting.
Blue light indicates that the AM10 is
in humidity mode.
White light indicates that the AM10 is
in fan mode.
Refilling the tank
When animation sequence shows, the tank is empty.
1
Unplug the machine and push the button to unlock.
Lift the loop amplifier away from tank, then tank away
from base.
2
Remove the cap and fill tank (no other part) to the top
with cold tap water. Replace the cap, tank and loop
amplifier. Use the handle for easier handling.
3
Switch 'ON': the water treatment procedure starts.
After 3 minutes the machine will start to humidify.
11