Matrix simado gfx11 System Manual page 56

Matrix
Use the following command to enable/disable the CLIR on the GSM
port:
202-Mode-#*
Where,
Mode Meaning
0 Disable
1 Enable
By default, CLIR is disabled.
Prior to enabling/disabling CLIR on GSM port, CLIR should be
enabled by the Service Provider.
Step 3
Enable/Disable the notification of incoming SMS
The GSM port can be programmed to notify the receipt of SMS.
Use the following command to enable/disable the notification of
incoming SMS:
203-Flag-#*
Where,
Mode Meaning
0 Disable
1 Enable
By default, the notification of the incoming SMS is disabled.
Step 4
Enable/Disable Location Information Indication
The GSM port can be programmed to notify the current location
information to the user.
Use the following command to enable/disable the Location
Information Indication on the GSM port:
205-Flag-#*
Where,
56
SIMADO GFX11 System Manual