Matrix simado gfx11 System Manual
  1. Manuals
  2. Brands
  3. Matrix Manuals
  4. Network Router
  5. simado gfx11
  6. System manual

Matrix simado gfx11 System Manual

Hide thumbs Also See for simado gfx11:
Table of Contents

Advertisement

Quick Links

Download this manual
SIMADO GFX11
System Manual
Version 4
August 2007
MATRIX TELECOM PVT. LTD.
MATRIX TELECOM PVT. LTD.
MATRIX TELECOM PVT. LTD.
MATRIX TELECOM PVT. LTD.
MATRIX TELECOM PVT. LTD.
Corporate Office:
394-GIDC, Makarpura,
Vadodara-390 010, India.
Tel.: +91 265 2630555
Fax: +91 265 2636598
E-mail: Info@MatrixTeleSol.com
URL: www.MatrixTeleSol.com
Factory:
39-GIDC, Waghodia-391 760,
Dist. Vadodara, Gujarat, India.
Tel.: +91 2668 263172/73
Fax: +91 2668 262631
E-mail: Support@MatrixTeleSol.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the simado gfx11 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Matrix simado gfx11

Summary of Contents for Matrix simado gfx11

  • Page 1 SIMADO GFX11 System Manual Version 4 August 2007 MATRIX TELECOM PVT. LTD. MATRIX TELECOM PVT. LTD. MATRIX TELECOM PVT. LTD. MATRIX TELECOM PVT. LTD. MATRIX TELECOM PVT. LTD. Corporate Office: Factory: 394-GIDC, Makarpura, 39-GIDC, Waghodia-391 760, Vadodara-390 010, India. Dist. Vadodara, Gujarat, India.
  • Page 2 Neither Matrix Telecom nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs or expenses incurred by purchaser or third parties as a result of:...

  • Page 3: Table Of Contents

    Contents Section 1: Introduction ..............5 Welcome ..................7 Packing List ................... 9 Warranty Statement ..............10 Introducing the System ............... 13 Protecting the System ..............15 Getting Started ................17 Section 2: Features and Facilities ..........25 Allowed and Denied Lists ............27 Answer Signaling on FXS Port ...........
  • Page 4 Section 3: Appendices ..............83 Appendix A: Technical Specifications ........85 Appendix B: Applications ............87 Appendix C: Features at a Glance ..........89 Appendix D: System Commands ..........90 Appendix E: Regulatory Information ........... 93 Index .................... 94 Notes .................... 97 Programming Register .............

  • Page 5: Section 1: Introduction

    Section 1: Introduction...

  • Page 7: Welcome

    Matrix dealers are trained and ready to give you the support you need to get the most from your Matrix product. In fact, most problems reported are minor and can be easily solved over the phone.
  • Page 8 • Allowed and Denied Lists • Automatic Number Translation 31 The user can use page named ‘Notes’ for making note of customer’s requirement and ‘Programming Register’ for registering the programming changes datewise. These could be used for future reference. SIMADO GFX11 System Manual...

  • Page 9: Packing List

    Matrix Packing List The ideal sales package for SIMADO GFX11 is as mentioned below: Accessories SIMADO GFX11 Antenna System Manual Adapter 9VDC 1Amp Line Cord for FXS port Screw M 7/30 Screw Grip Warranty Card Set Support Card Mounting Template SIMADO GFX11 CD •...

  • Page 10: Warranty Statement

    12 months from the date of installation which ever is earlier. During this warranty period, Matrix will at its option, repair or replace the product at no additional charge if the product is found to have manufacturing defect. Any replacement product or part/s may be...
  • Page 11 If Matrix is unable to repair or replace, as applicable, a defective product which is covered by Matrix warranty, Matrix shall, within a...
  • Page 12 This warranty is not transferable and applies only to the original consumer purchaser of the Product. Warranty shall be void if the warranty card is not completed and registered with Matrix within 30 days of installation. All legal course of action subjected to Vadodara (Gujarat, India) Jurisdiction only.

  • Page 13: Introducing The System

    PBX and a socket for inserting one SIM card. A simple conventional telephone instrument/CLI display telephone instrument can be interfaced to the SIMADO GFX11. You can select the GSM frequency Band for the system. You can call GSM number, directly from analog phone, without paying extra PSTN charges for the call.
  • Page 14 Matrix The SIMADO GFX11 is shown in the figure given below: =X=X= SIMADO GFX11 System Manual...

  • Page 15: Protecting The System

    • Do not allow anything to rest on the power cord of product or AC- DC Adapter. Do not place this product where the cord will be misused by people walking on it. • Do not overload wall outlets and extension cords as this can SIMADO GFX11 System Manual...
  • Page 16 If the product has been dropped or the cabinet has been damaged. f) If the product exhibits a distinct change in performance. • Do not use the telephone of the product to report a gas leak in the vicinity of the leak. =X=X= SIMADO GFX11 System Manual...

  • Page 17: Getting Started

    Matrix Getting Started Overview The Matrix SIMADO GFX11 allows you to call GSM number from the normal analog phone and establish a voice call. The GFX11 connects to the phone, SIM card and Antenna. The Matrix product looks as shown below: This chapter gets the GFX11 up and running quickly.
  • Page 18 Matrix Getting to Know GFX11 This Matrix product has all the ports located on the side panel and LED’s located on the front panel as shown below: Side Panel Ports: 9VDC 0.5A(Max) ANTENNA Various interfaces for connection are as mentioned below: No.
  • Page 19 Failure/Auto Baud Failure continuous SIM LED 1 sec. ON, 1 sec. OFF SIM Absent continuous • The SIM card detection takes place automatically (approximately after 5 secs.) and once it is detected, LED marked ‘SIM’ stays continuously ON. SIMADO GFX11 System Manual...
  • Page 20 Matrix • SIMADO GFX11 now searches for the network and when successfully registered on the network, LED marked ‘NW’ flashes slowly. • When the network is available LED marked ‘NW’ starts blinking slightly faster. • The SIMADO GFX11 is now ready for use.
  • Page 21 Matrix Instruction for the Connecting Interfaces: This section, describes the instruction on how to connect the Matrix GFX11 to GSM network and telephone. • Unpack the box. Get satisfied with the contents and the condition of the parts. Refer to Packing List. If parts are OK, proceed with connection as shown below: •...

  • Page 22: Clir

    • The number is dialed out from the GSM port and you get Ring Back Tone (RBT), from the network. • If the called party attends the call, speech is established. Incoming Call: • For incoming call, refer chapter ‘Call Progress Tones’. SIMADO GFX11 System Manual...

  • Page 23: Programming The System Through Fxs Port

    Matrix Mechanical Dimension of SIMADO GFX11 Relevant Topic: 1. Programming the System through FXS Port 68 =X=X= SIMADO GFX11 System Manual...

  • Page 25: Section 2: Features And Facilities

    Section 2: Features and Facilities...

  • Page 27: Allowed And Denied Lists

    What’s this? • Allowed and Denied Lists are a group of number strings. When the number is dialed out, the SIMADO GFX11 compares the dialed number string with the number strings in the Allowed and Denied Lists. If the number matches with the denied list number then error tone is issued to the caller.
  • Page 28 261-Location Index-#* To clear one location from the allowed list 261-0-#* To clear all locations from the allowed list 262-Location Index-#* To clear one location from the denied list 262-0-#* To clear all locations from the denied list =X=X= SIMADO GFX11 System Manual...

  • Page 29: Answer Signaling On Fxs Port

    TIP and +ve for RING in normal condition, after dialing the number. When call gets matured in the system, the Battery polarity of the FXS port will be reversed. Now TIP will become +ve and Ring -ve. SIMADO GFX11 System Manual...
  • Page 30 Use following command to program the Answer Signal to be generated on FXS port: 221-Answer Signal-#* Where, Answer Signal Meaning None Polarity (Battery) Reversal By default, Answer Signal to be generated on FXS port is 1. Relevant Topic: 1. Disconnect Signaling on FXS Port =X=X= SIMADO GFX11 System Manual...

  • Page 31: Automatic Number Translation

    ‘+912668263172’ can be dialed out. The call will go through successfully this time. Consider a SIMADO GFX11 that is connected to a VoIP Gateway • The numbers dialed out through the SIMADO GFX11 would then have to be mapped to the numbering scheme of the IP network.
  • Page 32 Say, the caller dials ‘1’ for calls to 022-XXXXXXXX and dials ‘22’ for calls to 011-YYYYYYYY, so on. Thus, this feature can be used for ‘Phone Book’ or ‘Abbreviated Dialing’, feature. How it works? SIMADO GFX11 uses a translation table of maximum 8 entries as shown below: Index Dialed String/Sub-string...
  • Page 33 Matrix ‘95’ is present in both. So, the SIMADO GFX11 will replace this sub- string with the number string programmed in the corresponding row in the Substitute-String column. Hence, the number dialed out would be ‘+912668263172’. How to program? Step 1: Program the Dialed String/Substring using command 291.
  • Page 34 ‘#1’. So, the number ‘+91’ should be programmed as #191. • The SIMADO GFX11 will replace every occurrence of ‘#1’ with ‘+’ in the number. • The allowed and denied lists are checked for the dialed number string.

  • Page 35: Call Duration Display

    The call duration will be displayed on LCD of telephone instrument. How it works? The SIMADO GFX11 allows to choose the type of calls for which the duration is required. The system supports to display the call duration for following types of calls: •...
  • Page 36 But, if DTMF CLI is set on the FXS port, display will be as shown below (only numbers): N HH MM SS Relevant Topics: 1. Programming the System through FXS Port 2. System Security (Passwords) =X=X= SIMADO GFX11 System Manual...

  • Page 37: Call Divert

    Provider and must be enabled by the Service Provider. This feature is useful in cases where the SIMADO GFX11 is connected to a PBX. The user can divert all the calls made to the SIMADO GFX11 to his mobile number during after office hours.
  • Page 38 Matrix Start Call lands on the SIMADO GFX11 Has user forwarded his call? The SIMADO GFX11 The GSM network routes the call to new checks for other features destination where calls are forwarded Is the new destination free? The GSM network places The GSM network blocks the call.
  • Page 39 Option Meaning All calls unconditional On busy If not answered When the SIMADO GFX11 is OFF or no coverage Code Meaning Disable call divert Enable call divert By default, Call Divert Code is 0. If Call Divert feature is to be disabled, do not enter ‘Destination Number’.

  • Page 40: Call Progress Tones

    The tones are explained as below: Dial Tone This tone is given when the FXS port of the SIMADO GFX11 goes OFF-Hook. This is a prompt for the user to start dialing. This tone lasts for 15 seconds after which the user gets Error Tone.

  • Page 41: How It Works

    Programming Tone This tone is given in the system programming mode when the SIMADO GFX11 is waiting for a new command from the user. This tone remains till the user dials the first digit of a new command. Confirmation Tone...
  • Page 42 Important Point: • f1*f2 means that f1 is modulated by f2. For All Countries Confirmation Tone : 400Hz, 0.1 on 0.1 off, Programming Tone : 400Hz, 0.1 on 0.9 off, Relevant Topic: 1. Distinctive Rings =X=X= SIMADO GFX11 System Manual...

  • Page 43: Calling Line Identification And Presentation (Clip)

    Identification and Presentation. The calling party number is displayed on LCD of the telephone instrument. The FXS port of the SIMADO GFX11 supports two CLI protocols viz. DTMF and FSK. Hence telephone instrument-supporting DTMF signalling or FSK signalling can be interfaced with the SIMADO GFX11.

  • Page 44: Calling Line Identification Restriction (Clir)

    Calling Line Identification Restriction (CLIR) What’s this? The SIMADO GFX11 supports the facility of the GSM network by which the user can keep his identity secret when he calls other party. This is known as Calling Line Identification Restriction (CLIR).

  • Page 45: Default The Configuration

    Service Provider like CLIR, Call Divert, SIM enable/disable, Call Progress Tones, Distinctive Rings, etc. • On giving this command, system restarts. Relevant Topics: 1. Programming the System through FXS Port 2. System Security (Passwords) =X=X= SIMADO GFX11 System Manual...

  • Page 46: Disconnect Signaling On Fxs Port

    This signal is generated by removing the Battery (Current) voltage on FXS port for the period of Open Loop Disconnect Timer and then restoring it again. It is also programmable. Thus the Polarity of the FXS port battery voltage is not changed. SIMADO GFX11 System Manual...
  • Page 47 FXS port: 249-Open Loop Disconnect Timer-#* Where, Open Loop Disconnect Timer is from 001 to 999 ms. By default, Open Loop Disconnection Timer is 500ms. Relevant Topic: 1. Answer Signaling on FXS Port =X=X= SIMADO GFX11 System Manual...

  • Page 48: Distinctive Rings

    Matrix Distinctive Rings What’s this? • The Matrix GFX11 supports different frequency and cadence for the ring when incoming call lands on FXS port. • These cadence is as per standardization for different country. For example: • India supports: 25Hz, 0.4 ON-0.2 OFF, 0.4 ON-2.0 OFF (sec.) •...
  • Page 49 Israel Italy Japan Korea Malaysia New Zealand Poland Portugal Russia Singapore South Africa Spain Thailand USA/Canada By default, Ring Type of Incoming call is 09 (India). Note: • Waveform for the ring is Sine Wave. =X=X= SIMADO GFX11 System Manual...

  • Page 50: Emergency Number Dialing

    GSM port. Normally SIM card is inserted and the module is registered with the network. This is called ‘True’ status of the GSM port. SIMADO GFX11, supports the emergency dialing feature for both status of GSM port, just like a mobile handset.
  • Page 51 Use the following command to program the emergency number in the table: 151-Index-Emergency Number-#* Where, Index is from 1 to 4. Emergency Number is 4 digits maximum. Use the following command to clear the emergency number at an index: 151-Index-#* SIMADO GFX11 System Manual...
  • Page 52 GSM module or in the SIM in the memory storage, which is classified as emergency number. For this information, contact your GSM Service Provider. Relevant Topic: 1. GSM Port Parameters =X=X= SIMADO GFX11 System Manual...

  • Page 53: Fxs Port Parameters

    Matrix FXS Port Parameters What’s this? • The SIMADO GFX11 offers the flexibility to program the Inter Digit Wait Timer and the CLI type for the FXS port. Few parameters are programmed to get the expected functions from the system, as explained below: •...
  • Page 54 • End of dialing is a mechanism by which end of number string is interpreted by the system and processing for out dialing is faster. By default, ‘#’ is considered as end of dialing digit. Relevant Topic: 1. CLIP 43 =X=X= SIMADO GFX11 System Manual...

  • Page 55: Gsm Port Parameters

    By default, the GSM port is enabled. When the GSM port is disabled, it is still possible to receive incoming calls. Step 2 Enable/Disable the CLIR on the GSM port The CLIR on the GSM port can be enabled/disabled. SIMADO GFX11 System Manual...
  • Page 56 Step 4 Enable/Disable Location Information Indication The GSM port can be programmed to notify the current location information to the user. Use the following command to enable/disable the Location Information Indication on the GSM port: 205-Flag-#* Where, SIMADO GFX11 System Manual...
  • Page 57 Use the following command to default the Receive Gain at the GSM port: 271-0-#* Step 6 Transmit Gain The GSM port provides a facility to adjust the transmit gain. This enables the user to adjust the right intensity for the transmitted signal. SIMADO GFX11 System Manual...
  • Page 58 • The actual dB values of Rx and Tx gain sent to GSM engine depends on the type of GSM engine connected. Relevant Topics: 1. SMS 2. Calling Line Identification Restriction 3. Location Information Indication 4. Network Selection =X=X= SIMADO GFX11 System Manual...

  • Page 59: Hotline

    Matrix Hotline What’s this? Matrix system offers, a feature by which the user has to just pick up his handset and the system will automatically dial out the fixed destination number. This feature is called Hotline. How it works? • When the Hotline is enabled, lifting the handset gives the regular dial tone.
  • Page 60 Matrix the hotline number. Provide a delay timer of 5 secs. Dial following codes to set the feature: 281-1-#* 282-0265630555-#* 283-5-#* =X=X= SIMADO GFX11 System Manual...

  • Page 61: International Mobile Equipment Identity (Imei)

    • After giving this command, the user gets a confirmation tone. After this the user has to go ON-Hook. The IMEI Code is displayed on the LCD of telephone instrument. The format of display is NNNNNNNNNNNNNNN. • The parts of the 15 digit IMEI code are: SIMADO GFX11 System Manual...
  • Page 62 • The CD (Check Digit) is a single digit used to check the IMEI for its validity. • IMEI can be displayed on SLT irrespective of the CLI type programmed on FXS port. Relevant Topics: 1. FXS Port Parameters 2. GSM Port Parameters =X=X= SIMADO GFX11 System Manual...

  • Page 63: Location Information Indication

    What’s this? This is a feature provided by the Service Provider. It must be enabled by the Service Provider. If enabled, the SIMADO GFX11 gives the information of the ‘Location’ where it is installed. The GSM network updates the current Location Information when the phone is registered in a different location.

  • Page 64: Network Selection

    • User can assign option for network selection, which will be applicable for the GSM port. • The feature works, when SIMADO GFX11 is powered ON or if the port is NOT registered with network. • Maximum 4 network operators can be programmed. In manual mode mobile port starts to get registered with network operator, as per order of programming with its network operator code.
  • Page 65 Step 3: To select GSM Frequency Band using command 333. Step 1 Use the following command to program network selection mode for the GSM port: 331-Network Selection Mode-#* Where, Mode Meaning Automatic Manual By default, Network Selection Mode is 1. SIMADO GFX11 System Manual...
  • Page 66 By default, GSM Frequency Band should be ‘900 + 1800’. Example 1: • You can program ‘850 + 1900’ GSM frequency band for countries which support both 850 and 1900 MHz frequency bands for the GSM network. SIMADO GFX11 System Manual...
  • Page 67 ‘Z’ (MCC 404, MNC 21) is little cheap for call charges. Then program the network operator as per priority, as shown below: He should program the SIMADO GFX11, for manual mode which doesn’t depend on field strength of the network.

  • Page 68: Programming The System Through Fxs Port

    Programming the System through FXS Port What’s this? The SIMADO GFX11 is a flexible system and can be programmed to suit your requirements. The SIMADO GFX11 can be programmed by entering into programming mode. Programming can be done at two levels viz.
  • Page 69 • In case the password is forgotten, the same can be set to its default value by defaulting the system. • System gives programming tone on entering programming mode. • If the password is not entered correctly, system gives error tone. SIMADO GFX11 System Manual...
  • Page 70 Indication’ is given. • To exit programming mode dial ‘00-#*’ from the programming tone. You get the SIMADO GFX11 dial tone. • If the response of the command is expected on display, the user has to go ON-Hook after the confirmation tone. Once the information is displayed the user has to go OFF-Hook and he will get the programming tone.

  • Page 71: Restart The System

    Many times it is difficult to physically walk to the system and restart it. It is convenient if we could do the same from telephone instrument. The SIMADO GFX11 offers facility to restart the system by dialing a code.

  • Page 72: Signal Strength

    Matrix Signal Strength What’s this? The SIMADO GFX11 gives the indication of signal strength available for communication. Thus the possibility of network availability can be found. This information is important when user is dialing a number/receiving a call. How to use it?
  • Page 73 Matrix below (only numbers): 11111 Relevant Topic: 1. FXS Port Parameters =X=X= SIMADO GFX11 System Manual...

  • Page 74: Sim Pin

    Use following command to change the SIM PIN: 113-Old SIM PIN-New SIM PIN-#* Where, Old SIM PIN is a 4-digits PIN of SIM Card used. New SIM PIN is the new PIN number the user wants to assign to the SIM card. SIMADO GFX11 System Manual...
  • Page 75 SIMADO GFX11 it will display the message to enter the PIN number on the phone. User needs to enter PIN. If incorrect PIN is entered thrice in a row, the SIM card gets blocked and the SIMADO GFX11 will ask for the PUK (Personal Unlock Number). This PUK is received from the customer care of the Service Provider.

  • Page 76: Sms (Short Message Service)

    • The SIMADO GFX11 supports Short Message Services (SMS) feature. • It allows receiving of messages. • Receipt of a SMS by the SIMADO GFX11 is indicated to the user on the telephone instrument. How it works? • The messages (SMS) that are received are stored at various locations in the memory of the SIM card.
  • Page 77 Important Points: • Messages can be read only on a FSK type telephone instrument. • Messages can be deleted one by one, index wise. Relevant Topics: 1. FXS Port Parameters 2. GSM Port Parameters =X=X= SIMADO GFX11 System Manual...

  • Page 78: Software Version And Revision Display

    Matrix Software Version and Revision Display What’s this? Matrix updates its products for upgradation and better performance of some features. Hence the user may like to know the current software version installed in his GFX11. This feature helps the user to know the version and the revision of the system without opening the system.
  • Page 79 Matrix Relevant Topics: 1. Programming the System through FXS Port 2. System Security (Passwords) 3. FXS Port Parameters =X=X= SIMADO GFX11 System Manual...

  • Page 80: System Security (Passwords)

    Matrix System Security (Passwords) What’s this? The SIMADO GFX11 programming is secured at two levels: • System Engineering Level. This level is protected by SE Password. • System Administrator Level. This level is protected by SA Password. System Engineer Password •...
  • Page 81 • Open the system, restore the jumper (J2) in its original position (B-C) and switch ON the system. • The SE Password gets the default value. Relevant Topic: 1. Programming the System through FXS Port =X=X= SIMADO GFX11 System Manual...

  • Page 83: Section 3: Appendices

    Section 3: Appendices...

  • Page 85: Appendix A: Technical Specifications

    : 55Vrms@25Hz Trapezoidal Connection : RJ11 Protection : Solidstate (over voltage and over current protection) Answer Signaling : None, Polarity Reversal Disconnect Signaling : None, Polarity Reversal and Open Loop Disconnect Disconnect Signaling : 500ms, Programmable Timer SIMADO GFX11 System Manual...
  • Page 86 Matrix Power Supply Supply Input : 9V-14VDC@1A. External adaptor (90- 265VAC, 47-65HZ) supplied with Matrix SIMADO GFX11 Power Consumption : 5W (Typical) Connector : Casio DC power Jack LED Indications : Power Supply, Network, SIM, FXS Mechanical Parameters Dimensions (WxHxD) : 130 x 197 x 45mm (5.12”x7.76”x1.77”)

  • Page 87: Appendix B: Applications

    Matrix Appendix B: Applications Application 1: SIMADO GFX11 Standalone SIM Card DC Power Phone 1 (With CLI Display) • User of Phone1 can dial any number from the GSM port. SIMADO GFX11 System Manual...
  • Page 88 Matrix Application 2: SIMADO GFX11 with PBX Antenna Department 2 Phone 5 SIM Card Phone 4 DC Power Phone 3 Phone 2 Phone 1 Department 1 FXO2 CO Line 1 FXO1 PSTN • As shown in figure department 1 of PBX of the SOHO Office, can access FXO1 to call any number on PSTN line.

  • Page 89: Appendix C: Features At A Glance

    #*-19-SE Password 04 To get into SA mode #*-18-SA Password 05 To find out the Signal Strength #*-11 06 To know the Location Information #*-12 07 To know the IMEI code #*-13 08 To program '+' SIMADO GFX11 System Manual...

  • Page 90: Appendix D: System Commands

    202-Mode-#* Port Enable/Disable Incoming SMS 203-Flag-#* notification on GSM Port To Enable/Disable the Location 205-Flag-#* Information Indication Program the answer signal to be 221-Answer Signal-#* generated on FXS Port 222-CLI Type-#* Program SLT port CLI Type SIMADO GFX11 System Manual...
  • Page 91 Set the Hotline Delay Timer Clear the Automatic Number 290-0-#* Translation table Program dialed number string in 291-No. Index-Dialed the Automatic Number String/Substring-#* Translation table Clear dialed number string from the Automatic Number 291-Number Index-#* Translation table SIMADO GFX11 System Manual...
  • Page 92 Program Network Operator Code 332-Priority-Code-#* with Priority 333-GSM Frequency Select GSM Frequency Band Band-#* 610-0-#* Clear All Call Duration Timers View the duration of the call type 610-Call Type-#* 620-Option-Code- To Set Call Divert Telephone No.#* =X=X= SIMADO GFX11 System Manual...

  • Page 93: Appendix E: Regulatory Information

    Matrix Appendix E: Regulatory Information SIMADO GFX11 System Manual...

  • Page 94: Index

    Dialed Calls Duration-See Call Duration Display Dialed String-See Automatic Number Translation Disconnect Signal-See Disconnection Signalling on FXS Port DTMF-See FXS Port Parameters Error Tone-See Call Progress Tones FSK-See FXS Port Parameters Frequency-See Distinctive Rings Frequency Band-See Network Selection SIMADO GFX11 System Manual...
  • Page 95 Open Loop Disconnect-See Disconnection Signaling on FXS Port 46 Outgoing Call-See Call Duration Display Personal Identification Number(PIN)-See SIM PIN Personal Unlock Number(PUK)-See SIM PIN Phone Book-See Automatic Number Translation Polarity Reversal-See Answer Signaling on FXS Port Priority-See Network Selection Programming Tone-See Call Progress Tones SIMADO GFX11 System Manual...
  • Page 96 Programming the System through FXS Port SLT Port Parameters-See FXS Port Parameters 53 SNR-See IMEI Subscriber’s Identification Module-See SIM PIN 74 Substitute String-See Automatic Number Translation TAC-See IMEI 61 Tone Type-See Call Progress Tones Transmit Gain-See GSM Port Parameters =X=X= SIMADO GFX11 System Manual...

  • Page 97: Notes

    Matrix Notes SIMADO GFX11 System Manual...
  • Page 98 Matrix Notes SIMADO GFX11 System Manual...

  • Page 99: Programming Register

    Matrix Programming Register S.N. Date Major Programming Changes made SIMADO GFX11 System Manual...
  • Page 100 Matrix Programming Register S.N. Date Major Programming Changes made SIMADO GFX11 System Manual...

Table of Contents