Pellet Loading Correction; Cleaning And Maintenance - abc 23kW SUPER VULCANO User Manual

12. PELLET LOADING CORRECTION

This function shall be used to fine tune the pellet power. If the power 5
is too high and power 4 insufficient, the power shall be corrected from
5 to - 1,2,3 so as to obtain the power between 4 and 5.
Press on the main screen.
Press "Combustion Management" and then "Auger Calibration"
or increase or decrease the value from 0 to 5. To return to the
Home screen press
NOTE:
If the pellet loading correction is to be made it is also necessary to
correct the fan speed "Fan Calibration". Should the pellet
correction be + the fan correction must also be + for the same value.
The stove is factory set for flawless operation. Should the high
quality pellets be used, there will be no need to make corrections.

13. CLEANING AND MAINTENANCE

Basic Information
The stove must be off and completely cooled before starting any
cleaning and maintenance activity.
The stove cleaning and maintenance intervals primarily depend on the
pellet quality. The wet pellets contain a high percentage of ash, dust
and unburned residues, which double the cleaning and maintenance
intervals. Therefore, we would like to emphasize once again that only
attested and certified pellets shall be used. The stove is equipped with
a removable handle for opening the firebox door. Having closed the
door, the handle shall be laid next to the stove in order to prevent the
possibility of door opening during the operation as well as handle
overheating. Cleaning is divided into three categories: Daily, Weekly
and Monthly.
18