Orion Network Pro 1500 RTX User Manual page 12

Note: Ensure the battery is fully charged during line mode when conducting functional tests.
Note: A list of events shown as below is not able to disable alarm buzzer:
Low Battery, Fan Failed, Fan Fault Time Out, and Overheat.
Note: User can disable the alarm buzzer when it's sounding, but an alarm will still sound when a new alarm event
is encountered.
 LCD display functions:
The following table describes the functions of the LCD display.
Table3. Description of LCD display function
No. Description
Input frequency and voltage
Input plug indicator
Output frequency and voltage
Output plug indicator
UPS status/user setting
display String
Warning indication
Settings
volume
Battery
Load capacity
Indicates the value of input frequency and voltage
Light on when the input power is at no loss.
Indicates the value of output frequency and voltage
The UPS has three groups of outlets. The output plug indicator will light on if there
is output power respectively. LS3 is the main outlet and cannot be configured.
Strings Indicate the UPS status (see Table 4)
Strings Indicate user setting options (see Table 5)
Light on when the UPS is failure or alarm.
Light on when the UPS under settings mode.
Indicates the amount of battery volume remaining. Each battery volume level bar
level display
indicates a 20% of total battery volume
Indicates the percentage of UPS load capacity which is being used by the
level display protected equipment. Each LCD level bar indicates a 20% of the total UPS output
capacity.
Function
11