Introduction; Safety Warning - Orion Network Pro 1500 RTX User Manual

1. Introduction

This line-interactive UPS series is a compact pure sine wave UPS designed for essential applications and environments,
such as servers, workstations, and other networking equipment. This model is available in the output rating of 1500VA
& 2200VA and is designed to protect your sensitive electronic equipment against power problems including power sags,
spikes, brownouts, line noise and blackouts.
The product is convertible to rack and tower forms. It can be placed either in Rack 2U or Tower form. The front panel of
the UPS includes an LCD display and four control buttons that allow users to monitor, configure and control the units.
The LCD includes a graphical bar, two status indications and four alarm indications. A control button from the front panel
allows users to silence the AC fail alarm and initiate the UPS self test sequence as well. The UPS case for 1500VA &
2200VA is made of metal. This product is powered from the AC mains and supply AC outputs via receptacles on the rear
panel. Communication and control of UPS is available through serial or USB ports located on the rear panel. The serial
port will support communications directly with a server.
Features:
 Microprocessor control guarantees high reliability
 High frequency design
 Built-in boost and buck AVR
 Easy battery replacement design
 Selectable input and output range
 Cold start capability
 Built-in Dry contact/RS-232/USB communication port
 SNMP allows for web-based remote or monitoring management
 Enable to extend runtime with scalable external battery module (EBM)
 Overload, short-circuit, and overheat protection
 Rack/Tower 2 in 1 Design
 19 inches rack mount available for all models

2. Safety Warning

DANGER:
This UPS contains high voltages. All repairs and service should be performed by authorized service personnel only.
There are no user serviceable parts inside the UPS.
WARNING:
 This UPS contains its own energy source (batteries).The UPS output may carry live voltage even when the UPS is
not connected to an AC supply.
 To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity controlled, indoor
environment, free of conductive contaminants.(Ambient :0-40°C)
 To reduce the risk of fire, connect to a circuit breaker provided with 20 amperes maximum branch circuit
over-current protection.
 To comply with international standards and wiring regulations, the sum of the leakage currents of the UPS and the
connected loads must not exceed 3.5mA.
 The socket outlet that supplies the UPS shall be installed near the UPS and shall be easily accessible.
 Protective earthing connections shall be such that disconnection of a protective earth should be made at one point
that is the furthest away from the UPS, maintaining the dedicated line in order to secure equipotential connection.
 The UPS and EBMs connected in series should be installed closely such that the operators can not touch the
interconnecting wire which is basic insulated from primary circuit.
3