Mitsubishi Electric WD-57733 Owner's Manual page 42

42
5. TV Menu Settings
Setup Menu, continued
Use the Timer to set a time for the TV to turn on auto-
matically. Use this menu to set a day, time, input, and
channel for the Timer. If the TV is already on at the
requested time, the TV will automatically tune to the
designated channel.
• The TV clock must be set before you can use the
Timer feature.
• When the Timer turns on the TV, press any key on
the remote control to keep it on. Otherwise, the TV
will turn off after five minutes.
• The POWER/TIMER indicator flashes green when the TV
is off to indicate the TV Timer has been set.
Setup Menu Options
Timer
Day
Timer
Time
Input
Channel
Use the Energy Mode option to select the level of power consumption while the TV is turned off.
Energy
Energy Mode
Keep this setting at Fast Power On if you need to:
• Have faster power on.
• Receive updates to ChannelView channel listings.
• Keep the TV Clock accurate for the TV Timer With the Low Power setting, you must reset the
TV Clock if the TV is left turned off for over 48 hours.
On, Off
Daily, Mon-Fri, (every) Sunday, (every) Monday, (every) Tuesday, etc.
Select the day or days of the week for the Timer to turn on the TV.
To set the time for the TV to come on:
1. With the hour highlighted, press
PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to highlight the minutes.
3. Press to change the minutes. Press and hold to change the minutes display quickly.
Ant-1, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined
and enabled inputs that appear in the Input Selection menu.
If the input is an antenna (ANT 1, ANT 2), press
scroll quickly through the available channel numbers.
Fast Power On
The default setting.
Low Power Uses less energy, but TV power-on takes longer and some TV fea-
tures may be unavailable.
Setup menu, Timer options
repeatedly to change the hour and the AM/
repeatedly or press and hold to