Wall Outlet Cable (No Cable Box); Antenna With A Single Lead; Antennas With Separate Uhf And Vhf Leads - Mitsubishi Electric WD-57733 Owner's Manual

Dlp high-definition television
Hide thumbs Also See for WD-57733:
Table of Contents

Advertisement

Wall Outlet Cable (no cable box)

It is very important to connect the incoming cable for
your primary viewing source to ANT 1/MAIN.
1. Connect the primary incoming coaxial lead cable to
ANT 1/MAIN on the TV back panel.
2. For an optional secondary antenna source, connect
an antenna (or cable) to ANT 2/AUX.
Figure 4. Wall Outlet Cable

Antenna with a Single Lead

A. For an antenna with flat twin leads
Required: 300-ohm-to-75-ohm transformer.
A1. For an antenna with flat twin leads, connect the
300-ohm twin leads to the 300-ohm-to-75-ohm
transformer.
A2. Push the 75-ohm side of the transformer onto ANT 1
on the TV back panel.
B. For cable or antenna with coaxial lead
Connect the coaxial lead directly to ANT 1 on the
TV back panel.
ANT 2 / AUX
ANT 2 / AUX
ANT 1 / MAIN
ANT 1 / MAIN
DIGITAL
AUDIO
OUT
IR EMITTER
NetCommand
Mitsubishi strongly recommends you avoid using
antennas with flat twin leads. Flat twin lead
antenna wires are subject to interference which
may adversely affect the performance of the TV.
We recommend using coaxial antenna cable.
3. TV Connections
Antennas with Separate UHF and
VHF Leads
Required: UHF/VHF combiner
1. Connect the UHF and VHF antenna leads to the
UHF/VHF combiner.
Y Pb Pr
(480i/480p/720p/1080i)
Y
Pb
Pr
L
2. Push the combiner onto ANT 1/MAIN on the TV
back panel.
PC/DVI
AUDIO
INPUT
AVR
AUDIO
OUTPUT
INPUT 1
INPUT 2
L (MONO) - AUDIO - R
S-VIDEO
VIDEO
HDMI
1
2
VIDEO: 480i /480p /720p /1080i /1080p
AUDIO: PCM STEREO
R
PC: VGA / W-VGA / SVGA / W-SVGA /
XGA / W-XGA / SXGA / 720p /1080p
Figure 5. Connecting separate UHF and VHF Antennas
Figure 6. Connecting a Single Antenna Lead
AUDIO
MONO)
R
(
3
ANT 2 / AUX
ANT 1 / MAIN
ANT 1 / MAIN
19
ANT 2 / AUX
ANT 1 / MAIN
ANT 1 / MAIN
DIGITAL
AUDIO
OUT
IR
N
DIGITAL
AUDIO
HDMI
OUT
IR EMITTER
VIDEO: 480i /480p /720p /1080i /
AUDIO: PCM STEREO
NetCommand
R
PC: VGA / W-VGA / SVGA / W-S
XGA / W-XGA / SXGA / 720p

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents