Remote Control - Mitsubishi Electric WD-57733 Owner's Manual

26
4. TV Operation and Features

Remote Control

1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be con-
trolled by the remote control. Set the slide switch
to TV for operation of the TV and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix D, "Program-
ming the Remote Control."
3. SLEEP: Sets the TV to turn off within 2 hours.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers
—
and the CANCEL key to enter digital sub-channel
numbers. Use also for entering letters or names
into menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
and 0 keys:
1
0
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears FAV and some
menu entries.
6. QV (QuickView™): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used on this model.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See "Setup Menu" in chapter 5,
"TV Menu Settings," for more information.
10. VOL (Volume Up/Down): Changes sound
/
level.
11. CH/PAGE / (Channel or Page Up/Down): Scans
up or down through memorized channels. Pages
up and down through screens when used with
ChannelView™.
12. FORMAT: Changes the shape and size of the TV
picture.
13. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (ANT 1/2) or a connected
device.
14. (Adjust Up/Down/Left/Right): Navigate
menus and change settings.
15. ENTER: Selects a channel number or menu item.
16. AUDIO: Selects individual audio settings to adjust.
17. VIDEO: Selects individual video settings to adjust.
18. GUIDE: Displays or removes ChannelView™ channel
listing for ANT 1 and ANT 2. Displays DVD disc or
top menu for a NetCommand-controlled DVD player.
! & blank space
/ * -
2
3
4
5
7 8 9
10 11
16
17
18
19
25 26
27 28
19. INFO: Displays an on-screen summary of the current
device in use and any broadcast information avail-
able, including current V-Chip ratings information.
See chapter 4, "TV Operation and Features," for
details.
20. MENU: Displays the main TV menu using the on-
screen menu system. When a sub-menu is open,
backs up one menu level.
21. EXIT: Closes TV on-screen menus/displays.
22. F1–F4
For devices under NetCommand control:
Perform NetCommand "Learning" to assign your
choice of functions to the F1–F4 keys.
For devices operating independently of
NetCommand: The F1–F4 keys work like the A,
B, C, D buttons on some cable boxes, satellite
receivers, and DVD players. Program the remote
control for your equipment and test the keys. See
Appendix D, "Programming the Remote Control."
23. (PAUSE): Freezes a broadcast TV picture. See
below for use with recordable media.
1
6
12
13
14
15
20
21
23
24
22